Computers Computer Networking

How To Service a Network

Introduction

It is not enough that computers are connected. There should be service network that will control and ensure the smooth flow of information and functions within the company, between the computers, networks and more. When you service network locally for example, you will be able to put your network in a whole new level with the tons of benefits that you can get for a much better performance and keep important information safe. This article will help you how to service network for a complete make over of your network that will really help you in the simplest way possible.

Step 1

To service network is very easy. The first step or first thing that you should do is to make sure that your computers must be configured when they are connected to IP networks before your computers can connect or communicate with other hosts or networks for that matter. You will need IP address, routing prefix and a default route. You don’t have to be an expert to do these and know these things when you service network. In fact, these words have become very common even to non computer experts.

Step 2

Depending on the configuration implementation, the server can give or allocate IP addresses. First, we have the static allocation is a method where the server allocates or assign an IP address based on the table with MAC address. Second, the dynamic allocation where a network administrator assigns IP addresses. Thirdly, is the automatic allocation is a method wherein the server that you have chosen assigns IP address permanently. IP addresses are very important to service network.

Step 3

This particular way of service network uses the same two ports assigned by IANA. It has four basic phases which are the IP discovery, lease offer, acknowledgement and request.

Step 4

During the discovery phase, client broadcast message to discover available servers. When the server receives this message or what we call the IP lease request, it reserves and offers IP address for the client or the one who request for it. Upon the offer of the server, the client accepts the request. When the server receives the request of the client, it has now reached the final phase of configuration.

Step 5

Once the configuration is complete, you have successfully service network in those very simple and easy steps to follow and very easy to remember as well. Everything else that you need regarding IP addresses and other information will be available to you upon request and it should be very easy and fast for you to do.

Tips

This is just one way of doing service network. There are many other ways to service network that will be best for your purpose. You can learn more about how to service network when you read reviews on the matter and visit websites and read articles like this that will help you with your service networks needs and other computer related topics.

Knowing these things will give you an edge in this fast pace technology age. Do not settle for anything less when you can have the best. Service network as easy as 1 2 3 by following these very simple steps and get the service you really deserve and pay for.

By kaye :), published at 03/27/2012
   Rating: 4/5 (11 votes)
How To Service a Network. 4 of 5 based on 11 votes.

Comments