Computers Tablets

How To Use Touch Tablet Pc

Introduction

Today we will learn some basics about using a touch tablet pc. The tablet is a very useful tool in everyday activities. This article is about the first steps that you will do when you first buy a touch tablet pc.

Step 1

How to configure the tablet orientation:

You are prompted to choose a default orientation of the tablet during the initial installation using the installation CD.

At log-in and user switching screens, we will use the tablet orientation implicitly selected when installing the driver. To change the default orientation, reinstall the driver using the installation CD when prompted to select a new default orientation. However, the default orientation used in the log-in screen will not be affected.

Step 2

To set the touch tablet pc for right-handed, open the control panel and select the "Tablet" tab. Choose the right-handed option. Tablet driver automatically configures all aspects of the tablet for use with your right hand. Next, turn the tablet so that the function keys to be left.

Step 3

To set the touch tablet pc for left-handed, open the control panel and select the "Tablet" tab. Choose the left-handed option. Tablet driver automatically configures all aspects of the tablet for use with your left hand. Next, turn the tablet so that the function keys to be right.

Step 4

Now some things about the perception of the active surface:

Depending on the model of the touch tablet pc, it can accept the use of touch, pen, or both. However the touch and the pen cannot be used both in the same time.

Step 5

Using touch:

On touch-sensitive tablet models, slide your finger across the active area to position the cursor. Use one or two fingers to click and navigate. Use two fingers for gestures that control other functions such as running or increase / decrease.

For tablets that support both pen and touch use:

Touch is disabled whenever the pen tip or eraser is located near the touch tablet pc. Pick up the pencil and remove the hand from the active surface of the tablet to re-activate the touch function. Active area for the pen is slightly larger than the active surface to touch.

Tips

Using the pencil:

The pencil works only on surfaces of a touch tablet pc that support pen use. Wherever you place the pencil on the touch tablet pc, the screen cursor will jump to the corresponding point on the screen. The cursor position on the screen indicates the position of the pen, and the cursor will move across the tablet surface as you move the pen.

For a touch tablet pc that supports the use of a pen, the active surface is a scale representation of the screen / computer screens. By default the active surface uses the entire screen or all the screens if you have multiple screens.

Sources and Citations

I hope this little guide helps you to make a good start with the touch table pc. In the near future the tablets will be more and more useful and everyone should have one. They already have an important role in the life of many people, helping them do their job or having fun.

By Stanculescu Mihai Bogdan, published at 02/07/2012
   Rating: 4/5 (10 votes)
How To Use Touch Tablet Pc. 4 of 5 based on 10 votes.

Comments