How Does a Ddr Memory Dimm Work?
Computers Memory

How Does a Ddr Memory Dimm Work?

Published at 03/08/2012 15:51:07

Introduction

How Does a Ddr Memory Dimm Work?

A DIMM also called dual in-line memory module contains a series of active random-access memory combined circuits. These units are attached on a printed circuit board and designed to use in personal computers, workplaces and servers. DIMMs began to replace SIMMs also named as single in-line memory modules as the major type of memory module as Intel P5 based Pentium processors began to gain market share. Dimm are basically the slot where RAMs are to be placed. The speed of the personal computer depends also on the DDR memory Dimm because of different types of slots. In the starting era, the very first DIMM was to be placed with sdr ram, these rams had really slow speed, but now DDR-1 ram is really popular among all types of mother boards. DDR rams has relatively higher speed as compare to sdr rams. DDR memory Dimm of a mother board also gets upgraded due to the new DDR rams.

Detail

How Does a Ddr Memory Dimm Work?

Dimm or dual in-line memory module is a small circuit board that holds memory chips. A single in-line memory module (SIMM) has a 32-bit path to the memory chips whereas a dual in-line memory module has 64-bit path. As the Pentium processor requires a 64-bit path to memory, you must have to install SIMMs two at a time. But with DDR memory Dimm, you can install memory one DIMM at a time. DDR memory Dimm is a module containing one or several random access memory (RAM) chips on a small circuit board with pins that attach it to the motherboard of a computer. DDR memory Dimm is much better and fats then the SIMM, because SIMMs is of relatively slow speed and have 32-bit path to the memory chips, where DDR memory Dimm have 64-bit path to the memory. So well-known due to the faster speed, DDR memory Dimm us mostly used in personal computers and also the systems used in different companies.

Features

How Does a Ddr Memory Dimm Work?

Motherboards of a system also vary, like different motherboards have different DDR memory Dimm slots. So RAMs are used according to the DDR memory Dimm of any computer. Operating system also differs like some have 32-bit and some have 64-bit operating systems, usually the latest computers and motherboards are having 64-bit operation system that fully support DDR memory Dimm to give the best speed and performance. Normally a single DIMM can be used instead. A DIMM has a 168-pin connector and supports 64-bit data transfer. It is well-thought-out that future computers will standardize on the DIMM. There are also upgraded DDR rams available in market like DDR-2, DD-3 and DDR-5, these rams are really fats and have the power to give your system a rocket speed.

Comments

So DDR memory Dimm works in an efficient way to give up a good speed to the system. Basically DDR memory Dimm is used to place the memory chip in it and it helps the Ram to connect with the system and transfers data and busses, the more stronger will be the Dimm, the more working speed you will be able to get from your computer.

Comments

Most Recent Articles

  • About Dimm Memory Ddr
    Dimm memory ddr is a type of memory circuit which is integrated in a specialized manner and are used in the computers to perform different processes. Super models of dimm memory ddr are...