Computers Memory

How To Increase Desktop Memory Power

Introduction

Many people who use computers in their offices or at homes have different needs; hence, the level of the memory in the machine will differ. When a client has bought a computer which cannot work efficiently because of the speed, then they can have the option of increasing the desktop memory by upgrading. Here are some procedures on how it is done.

Step 1

First, you will need to consider the current desktop memory size. This can be done through a simple procedure where any one can check on the capacity of the computer by checking on the task bar. By opening the properties, you will be in a position to get the correct information about the current size of the memory.

Step 2

After you have ascertained the desktop memory in the computer, you will be required to buy the desktop memory plate of your size be it 512MBs or above. Then locate the modules in the processor. This is done when you are sure no current is running. Many computers have two modules which forms the base of the memory slot.

Step 3

The desktop memory size will be considered first which you have been using. If the computer has more than two empty desktop memory slots in the modules, you can just add your new memory on top of the existing ones or replace with a higher memory packets. However, it s a good idea to first get the information on the compatibility of the memory modules before installation.

Step 4

The desktop memory upgrade can now be obtained from a variety of sources. This can be from the wholesalers or companies that deal with the manufacture. You can still get the memory module from online sources which will work well in your computer. In order to get the best deals buy a memory that was manufactured by the company that built your computer. You can also involve the experts in IT.

Step 5

After getting the new desktop memory modules from the dealers, you will now have the installation procedures done either by an expert or if you know, then simply do it. First, make sure the power is off. Plug off the old memories from the mother board and place the new memory in the right place or socket. Press the memory until a click sound has been produced. Close the memory with the clip on each side.

Also

After completion of upgrading the desktop memory, you will have to test it if it is working properly. You will need to re boot the computer. You then check whether the newly installed part is compatible with the new machine. Do a diagnostic test to ascertain whether you have succeeded in up grading the memory.

Finally

And, finally, after you have tested the process, just look for the tell tell sign of any problems after the installation of the machine. One sign of problem is when the computer fails to boot. This process can be done again to make sure that the memory has been set well. If it fails, then you can involve the services of a professional who will guide you through.

By Charles Githinji, published at 04/05/2012
   Rating: 4/5 (11 votes)
How To Increase Desktop Memory Power. 4 of 5 based on 11 votes.

Comments