Computers Memory

How To Use Memory With Your Computer

Published at 02/16/2012 02:01:55


To use more memory with your computer you got to know some thing. In this material we will explain how you can have more memory with your computer and how you can use that memory with your computer to improve performance.

Step 1

One of the main secrets of computer rapidity is his RAM memory. It is a component on which processed data is stored temporarily (until the computer is off). The higher the RAM capacity installed, the faster your computer will run.
Current computers have enough RAM memory with them; its average is somewhere around 2 GB, enough for daily processes carried out by the memory with the computer.

Step 2

If the computer you use to is running complex games, the amount of memory required varies depending on needs. To know the amount of RAM available to the computer, do a right click on "My Computer" and choose "Properties".
To use more memory with your computer you got to fit it in the right slots.

Step 3

If we conclude that the system is slow due to lack of memory we decide to add new modules, or replace the present with others of a higher capacity. Depending on the case, we must take into account the following requirements to gain more efficiency, instead of losing:

Step 4

A. If we decide to add RAM, we must take into account the compatibility of the existing module with the one that will be installed. It is very important that they run at the same speed (MHz). To use more memory with the personal computer speed is very important. Speed is measured in MHz. Overall, memoirs of 533 MHz, are cheaper, and therefore we tend to say "memory and that's all...” Yes, yes, but it is possible to fail in trying to get the operating system to operate quickly.

Step 5

B. If you decide to replace current modules, it is recommended to buy memory with the same manufacturer as the computer. For a desktop computer it is easy to change the memory with other modules. It's not the same thing with laptops, for that reason, we recommend that you will be careful when you remove the screws so that you avoid those cases where after reassembly you got screws left. RAM is held on the motherboard by clips. They are positioned at each end of the RAM. To remove a module, press carefully, because they will release the component.


Pay attention to handling RAM. We recommend not to touch it s faces and connections directly. If you can not avoid this, use a piece of kitchen paper or a dry cloth.
Install the new module is the same way, taking into account the extracted memory model. It's important not to force the module because it must fit perfectly. The module must be installed so that the "pin" partition will reach the space created especially for this memory module.